You are here: Home » Hot » Magnetic Track Light

What Is the Magnetic Track Light

What is the magnetic track lighting system?
Magnetic track light system is a new minimalist lighting system for a modern space, will be the new trend for your DIY home lighting. It creates the vertical and horizontal styles on the wall and ceiling to meet with many creative DIY lighting ideas. 

What is magnetic track light?
Magnetic track light is a low voltage track with the aluminum housing, No tools are required, as adapters of the light fixture are installed using magnets, which gives you the flexibility to combine them in a variety of ways, then powered by an AC110-277V to DC48V transformer for whole track system.

Where to use magnetic track system?
Now this new track light system has already has been used in the bedroom, living room, the kitchen and the dining room in a house, office, museum etc modern space by the designers and architects.

Types Of Magnetic Track Light

We will launch newly designed products every month to provide you with a more comprehensive choice.

Features of Magnetic Track Light

Track Rail

It is made from the high grade aluminum extrusions that can be recessed, surface mount and pendant installation. The track rail has the invisible conductive copper strip on both sides inside the track. and the lighting circuit is max 15amp for this track rail.

Invisible 48V conductors on both sides.

What installation types of Magnetic track light system?
It is only 3 types of installation method to the magnetic track light: recessed, surface mount and suspension. Regarding the recessed installation, you should check it first if the ceiling or wall is the Plasterboard, and there is the space to insert the height of the track.

Light Fixture

Different light fixture can be available for the magnetic track light system: spots, linear, grille and pendants. Each light fixture is designed with the magnetic adapter. It means- can be toolfree positioned and repositioned into the track rail, thanks to their magnetic fixation, making it comfortable for the user to adapt the lighting according to the specific setting of the room. Magnet force connects profile and modules both mechanical and electrical. 

How the light fixture connect in the magnetic track rail?
The adapter is the lamp-holding fixtures. Each has two metal tabs that connect it to the conductive copper strip inside the track. It has a magnet at the bottom of the adapter, such a fixture on the iron bar in the track, Besides, there are two lock devices on the adapter to further secure the luminaire to ensure that it will not fall out of the track. Toolfree positioning, adjusting and focusing of light to meet specific needs of the room with this adapter.

Pre-configured Corners

Pre-configured corners complete the system that can run up, around and across walls and ceilings. It helps you expand the system’s application range.

Magnetic Track Light's Installation

Concealed Magnetic Track

1.We need to prepare a wooden square slot with a width of 34-38mm and a thickness of 12mm.
2.Insert the magnetic track in the direction of the zigzag shape of the iron sheet.
3.The magnetic track and wooden groove are fixed with nails.
4.Install the corner modules.
5.Install the plug and lock it with M3 screws.
6.Cover with gypsum board and fix with nails.
7.Make up putty.
8.Stick anti-cracking net.
9.Brush batch of gray paint.
10.Complete the installation.

Lifting Magnetic Track

1.Fix the position with M4 self-tapping screws.
2.Tighten the tension head clockwise.
3.Insert the positioning screw into the chute block.
4.The chute block is aligned with the rail groove and inserted.
5.Tighten the fixed thread head clockwise.
6.Complete the installation.

How to Use Track Lights

Pre-configured corners complete the system that can run up, around and across walls and ceilings. 
It helps you expand the system’s application range.
 +86 13925354948  
  0760-88752722
  No5/3.kanglong 3rd Road,xinmao Industrial Area,henglan Town Zhongshan City Guangdong
URLIGHTING (12197) All rights reserved